1 / 4
Nuova Simonelli MCF Spout
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spout to replace doser assembly in older Simonelli and Eureka MCF espresso grinders.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
Assembly suggestions:
- Soften the adapter plate with a heat gun if fitment to grinder chassis is poor
- Print with PETG or similar at 100% infill
V6 Update:
- Redone from scratch based on new measurements
- Model comes in two friction-fit parts; adapter plate and spout
- Adapter plate has ears and a pinched-in area to make it easier to affix screws
- Angled spout seems to be the best design; curved spout had retention issues
v7 Update:
- Seems to work fine as-is with inclined stand; no adjustment needed
- Adjusted angle between screw holes from 57 to 55 mm