GNK-200 wire protection plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support plates for GNK-200
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Protection Plates
While I haven't personally encountered or heard of fire selector and RPM switch wiring snapping (or, more precisely, being ripped from contacts due to solenoid motion), I still wasn’t entirely comfortable with the setup.
Additionally, at least in my case, the lower part of the solenoid is essentially "floating" in the air. These plates can provide extra support for a solenoid in your build.
Even though this isn't really an issue for me—I’ve commissioned a metal SLM cage from an AliExpress vendor (and I HIGHLY recommend doing the same instead of printing an FDM plastic one)—a standard plastic-printed cage may bend over time.
Metal, on the other hand, acts as a heatsink, effectively dissipating heat from the motors. It is also much more durable and cannot delaminate due to vibrations like an FDM-printed part.
There are two versions of the plate: 1mm and 2mm thick. Print whichever suits your needs.