Garden Dibble with spacer cones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a quick and way to easily make a seedling hole with a specific size and depth and automatically make spacing…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Wanted a quick and way to easily make a seedling hole with a specific size and depth and automatically make spacing marks for onion plants going into our garden this spring.
Designed a quick garden dibble in Tinkercad that will allow me to make a planting hole that is 2" deep by 1/2" wide to drop in onion plants. It also leaves marks with the cone markers on the bottom in a 3" radius. Moving the dibble left, right, up or down 6" and aligning a spacing cone mark from the last planting hole gives me a 6" spacing between onion plants!
You can size this design up or down appropriately to whatever planting spacing you need or just keep moving it over in 3" or 6 " increments for your spacing needs.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
No
Supports:
Yes
.3
Infill:
15%
Notes:
I set wall thickness to 1.5mm for strength and cubic subdivision for infill pattern for sturdiness.
Category: Outdoor & Garden