Steel Sword from Skyrim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Steel Sword replica from The Elder Scrolls V: Skyrim modeled for use as a cosplay prop.
- Ocena
- 5 / 5
- Polubienia
- 825
- Pobrania
- 2554
- Wydruki
- 10
- Wyświetlenia
- 12 039
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Comes in 5 parts that should fit on most larger printers if printed vertically as I did. I printed mine on an FLSun T1. Most of the parts will fit on a 250 mm or 256 mm printer like the Ender 3 or Bambu but the top of the blade is a bit too long and may need to be split. I have updated the files to include a whole version of the blade so you can cut it to custom lengths if you like.
There is a 7mm hole modeled through it for a ¼ inch rod, but you can use it for wooden pegs if you're just displaying it and don't need the strength of the rod.
Recommend printing with 3-4 walls for strength.
Final sword length is about 35 inches.
Process video here: https://youtube.com/watch?v=Z70XnNlFix0