1 / 2
AvionRC Ikon 3 O4 Pro TBS M10 GPS/silicone mount — zdjęcie 1
1 / 2

AvionRC Ikon 3 O4 Pro TBS M10 GPS/silicone mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

GPS/silicone soft mount

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
166
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

This mount replaces the stock O4 Pro camera mount and is specifically designed for the TBS M10 GPS, possibly fits others aswell (there is also a model without GPS). It fixed all jello issues in Gyroflow and didnt leave any vibrations with RockSteady for me. The camera mount also fits ND filters better, allows more tilt angles (~2° to ~35°) than the stock one and discards the mounting slot for a better alignment.

Additional hardware required: 

4xM2x8 screws 

4xM2 washers 

4xM2 nuts 

4xM2 4.4x2x5.6mm silicone vibration dampers (they should be symmetric but are often not symmetric in the images)

Print Settings

Supports:

Yes

Resolution: 

0.1mm

Infill:

10%

Filament Material: 

TPU

Tagi