1 / 3
Anycubic Kobra S1 Anti Vibration Foot Pads — zdjęcie 1
1 / 3

Anycubic Kobra S1 Anti Vibration Foot Pads

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

10% gyroid infill 95A TPU Since anycubic doesn't like providing things I went ahead and made anti vibration feet

Ocena
5 / 5
Polubienia
137
Pobrania
927
Wydruki
5
Wyświetlenia
4860
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

10% gyroid infill with 95A TPU
Since anycubic doesn't like providing things we need I went ahead and made anti vibration feet.
These are a snug fit so if you need to pick up the printer these will stay in place, i put a dab of crazy glue on mine in case I need to slide it. Also provides airflow under the printer in case you have your printer in a tight spot and a wider foot print to sit on.

Tagi