Cute Banana
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A banana that unfortunately has been bitten a little (not by me) and has wobbly legs. (Single or Multicolor) (Multipart)
- Ocena
- 5 / 5
- Polubienia
- 163
- Pobrania
- 709
- Wydruki
- 5
- Wyświetlenia
- 2211
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Standard Digital File License
Tips for printing:
- Supports: No!
- Layer height: 0.16mm (optimal)
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: -
- Detect thin walls: -
- Brim: Not necessarily if you have good print adhesion!
⚠Warning⚠
Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
Colors and filament I used (3 Color Version):
- PLA / White - for the eyes and peel
- PLA / Black - for the eyes and nose
- PLA / Yellow - for the body
Colors and filament I used (3 Color Version Half Painted) (Faster Printing):
- PLA / White - for the eyes
- PLA / Black - for the eyes and nose
- PLA / Yellow - for the body
Or decide for yourself which colors and how many you want to use!
This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!