Husky Cabinet Foot (Caster Replacement)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple foot designed for Husky tool cabinets that replaces the stock casters to make the cabinet a stationary fixture.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
A simple foot designed for Husky tool cabinets that replaces the stock casters. Turn your Husky tool cabinet into a stationary cabinet while also reducing the height by about 12.5cm! A great way to modify a Husky cabinet for use in an indoor office.
Dimensions are 70mm x 100mm x 25mm.
This part is designed to replace the casters on a Husky Cabinet Model #HKST98066BK. It should work on any other cabinet using the same casters, but I have only tested it on the model listed above. Installation is simple:
- Unscrew the two bolts holding the caster in place.
- Remove caster and place foot into the same holes used for the caster.
- Screw the two bolts back in place in the foot. (The foot is designed to be large enough for a socket wrench to be used).
Print Settings
I used the following settings for my print.
- Material: PETG
- Supports: Auto-generated, From Build Plate Only
- Infill: 20%