1 / 4
Prusa CORE One purge/trash tray for 10x1.8mm Round Magnets — zdjęcie 1
1 / 4

Prusa CORE One purge/trash tray for 10x1.8mm Round Magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tray to catch purges and keep things tidy

Ocena
5 / 5
Polubienia
60
Pobrania
257
Wydruki
8
Wyświetlenia
1730
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Great original model, but when I configured negative volume for 1.8mm magnets in PrusaSlicer, the layer above the holes were inconsistent pattern-wise and very thin. Also, the bottom fillet could introduce a little bit of sag. I thickened the bottom by about 1mm and added the holes in Fusion 360.

A perfect fitting incognito mod if you align with the screws per the original instructions and print in Prusa Galaxy Black filament!