Gryphon blaster spare flywheel cage gridfinity transport insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carry a spare a Gryphon flywheel cage to an event without motor contact damage or wheel misalignment.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
I needed a way to bring a spare Gryphon flywheel cage to an event without damaging it, that didn't involve printing a 2nd blaster.
So here is a 3×2×15 insert for Gryphon cage that is compatible with gridfinity. The cutout at the bottom is for the cable and XT-60 connector. I have sized the height for my muzzle piece. For a standard cage just modify the file, or put a spacer in the bottom to raise it, or a foam in the top to keep it down.
The case in the photo is a gridfinity rugged box, specifically this one (https://www.printables.com/model/757297-gridfinity-rugged-storage-box-parametric-and-custo). It's a 12U high base, and 3U high lid.