1 / 4
MOICO Walkie-Talkie D-Ring Carabiner Clip — zdjęcie 1
1 / 4

MOICO Walkie-Talkie D-Ring Carabiner Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MOICO Walkie Talkie D-Ring Carabiner Clip, inspired by some similar designs I saw elsewhere

Ocena
0 / 5
Polubienia
6
Pobrania
18
Wydruki
0
Wyświetlenia
129
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

MOICO Walkie Talkie D-Ring Carabiner Clip, inspired by some similar designs I saw on here such as @vidision's here: https://makerworld.com/en/models/717423-d-ring-clip-for-midland-radio?from=search

 

I printed theirs and found that my knock-off Midland radio actually isn't compatible with the one they designed, so I made my own. I printed in PETG at 0.12mm layer height, and no matter what you choose for infill it will be nearly solid. I did Gyroid at 30%. These haven't been mounted tested yet, but the stock clips are complete dog crap so I assume they'll be better than those!

 

Don't reorient the part, and you may want to print with a brim (I did).

Tagi