1 / 3
Lanard Shot Gun / Air Zone Triple Shot  / Huntsman Pillager X12 Rotation Bar — zdjęcie 1
1 / 3

Lanard Shot Gun / Air Zone Triple Shot / Huntsman Pillager X12 Rotation Bar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement rotation bar for the Triple Shot. Altered from the original stock part.

Ocena
0 / 5
Polubienia
4
Pobrania
9
Wydruki
0
Wyświetlenia
77
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Replacement rotation bar for the Triple Shot. Altered from the original stock part. This part is known to break where the return extension spring hook is located, and the cam notch is notorious for rounding off after extended use over a period of time. The return extension spring has been deleted in favour for structural rigidity.

I have added an alternative design where notches have been cut in the rear portion of the bar, for those who want to try and modify their blasters further by making the necessary trimmings to achieve slightly further priming (be mindful that this will include trimming the pump handle and rotation bar guide slots at the minimum).

Gluing both parts is optional, however both pieces should snap together.

Printing with a 0.2mm nozzle is recommended for increased rigidity (however 0.4mm will work).

Tagi