USS Duncan Battleship
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cool battleship somewhat based on other historical warships
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 326
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial
USS Duncan
This battleship is partially based on other historical warships and partially on my own imagination.
You need to glue the barrels into the holes as shown in the picture. You can (if you want to) glue the turrets into their holes but I would just leave them as they are so that they can rotate.
Most (if not all) of these files require supports (minimal) but it is still a pretty easy print.
Scale up or down as needed (but not too low as some of the parts are kind of tiny).
If you have any questions, leave a comment or send me a message.
You need to print:
1x Base (this is the body of the ship)
8x Missile (These go in the little holes in the side of the ship)
4x Rear Gun Turrets (These go in the four holes in the back)
4x Rear Gun Barrels (Insert these into the turrets)
2x Point Defense Gun Turrets (These go into the little things sticking out behind the control tower)
2x Point Defense Gun Barrels (Insert these into the Point Defense Gun Turrets)
2x Front Gun Turrets (These go in the front)
4x Front Gun Barrels (2 per gun, insert in the Front Gun Turrets)
3x Rear Big Gun Barrels (insert into the holes pointing backwards)
If you would like to use this model for commercial purposes, please leave a message.