Small cozy lithophane lamp (E14 bulb)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this small cozy lamp to be used as a reading or night stand lamp. Gives a very cozy light.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I designed this small cylinder shaped table lamp for lithophanes, but it can most definitely be used without. I uploaded the lamp shade without lithophane imprints on it so print that if you do not want to have an image on the shade, you can just print that one instead of designing one.
Fits an E14 bulb fitting with a 10mm attachment screw like this one:
https://www.harald-nyborg.dk/mignonfatning-e14-hvid
Fits an E14 bulb like these ones:
https://www.harald-nyborg.dk/philips-led-paere-21-w-e14-t25l
https://www.harald-nyborg.dk/philips-led-paere-25w-e14-t25s
Measurements for making a custom shade:
ID = 64,4mm
OD = 68mm
Shade channel Depth = 3mm
For lithophane shades, use these settings to print one that fits snugly into the shade foot:
Made using
https://tool.itslitho.com/CreateModel
Shape options
Shape = cylinder
Height = 150mm
Diameter = 63,7mm
Min. thickness = 0,8mm
Max. thickness = 3,2mm
Frame options
Frame = frame
Thickness = 3mm
Depth = 1,5mm
Angle = 0 deg.
Print instructions
Shade holder:
Print the shade holder with the legs pointing upwards
No supports
0,1mm layers for best look
70% infill, primarily for weight so the cord does not pull the lamp off the table.
Shade:
You can find the guide here from itslitho: https://itslitho.com/itslitho-blog/slicer-settings-for-lithophanes-tweaking-to-perfection/
I used 4 perimeters and 0% infill, and printed on 0,1mm layers for best image detail.