Bambu Lab P1P P1S adapter for Filler - Filament Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a support for the Filler - Filament Holder compatible my P1S with AMS.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a support for the Filler - Filament Holder compatible my P1S with AMS. So I designed a model that can be fixed to the back plane of the printer with both AMS PTFE tube and 4 pins connector in place.

It can be installed in place of the original support. Just use 2 screws M3x10 to secure it

I printed mine using Prusament PLA Gravity Grey I have in stock. But any other material can do the job. Nothing special for printing instructions
Model is compatible with P1P and P1S series. Should be OK also with X1 but not tested/verified
On top of .stl and .3mf files, I uploaded Fusion 360 .f3d and.step files so you can modify the design and adapt it to your needs.
As usual, feedback and comments (and for sure "likes") will be always welcome. Downloads will also be greatly appreciated. Feel free to post nice pictures of your makes 😉
Enjoy
If you like this model, take a look also at my other designs in Printables.