Radxa Rock 5B+ Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Radxa Rock 5B Plus Case designed for my Belabox IRL Backpack, Might also fit a 5B.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 288
- Wydruki
- 1
- Wyświetlenia
- 1791
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
There are a few files, Please choose the correct one for your use case. In PrusaSlicer, Right Click → Split to separate into lid/body. Print with Tree supports!!!
** 25/05/10 - Removed bosl2 dependency, added options [less_fans, shrink, fans_25mm], waiting on 25mm fans to ship so have not tested the fit yet. Have not tested every variation so YMMV.
Continued from my Orange Pi Cases. SD card and Sim card are accessible without disassembly. Internal mounting for additional modem, however, you may need a carrier board with auxiliary power. SSD Slots are not useable currently but I may support that later. SMA Antenna's can be mounted in the hex grids on the side, or on the lid mounts in some versions.
Printed in PETG with .6mm nozzle, You may need to cleanup the model slightly depending on your printer.
The body has a few pegs for board alignment and needs two small self tapping screws (approx. M2.5x6mm). Case is sealed with 4 Flat M3x6 screws, there are various possible positions for a 30mm x 10mm fan or 25mm x 10mm fan depending on the version.
For the internal USB connection to a modem you can try something like this https://a.co/d/g8g6egH or make your own cables as I did.
I'm using this https://a.co/d/adTPj4G modem carrier board but this one https://a.co/d/f89FT0k should work as well.