1 / 8
PSP 1000 GRIP - Fuzzy Skin Textured — zdjęcie 1
1 / 8

PSP 1000 GRIP - Fuzzy Skin Textured

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My version of a psp 1000 Grip, uses a unique clip design.

Ocena
5 / 5
Polubienia
18
Pobrania
134
Wydruki
1
Wyświetlenia
724
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This PSP grip is similar to others but has a different style of clip.  The clip attaches to the top of the psp using the “accessory screw holes” on each side of the USB port.  The bottom holds the psp with a tension clip.  (See photos)

In addition the handles are a bit larger than others I looked at, it has a cutout for both power and WiFi switches, there is also a cutout for the headphone jack.

I recommend using the .3mf file for this as I have painted Fuzzy Skin onto the hand grip portions for a good non slip texture. 

The grip and clip are oriented for best print results.   I considered adding the clip to the grip all  as one piece but the clip is MUCH stronger when printed on the its side.  I actually double side tape it together but it can be glued as well.

 

*** Make sure to clean ALL supports from the pins on the clip (see image).  This is so the psp fits tight and clean to the clip.***

Tagi