1 / 4
Skadis Calipers Holder, Mitutoyo Absolute 150mm or 200mm (6" or 8") — zdjęcie 1
1 / 4

Skadis Calipers Holder, Mitutoyo Absolute 150mm or 200mm (6" or 8")

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printable design to mount Mitutoyo Digital Absolute Calipers 150mm or 200mm (6"or 8") IKEA Skadis pegboard.

Ocena
4,667 / 5
Polubienia
14
Pobrania
106
Wydruki
3
Wyświetlenia
399
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

I designed this to hold Mitutoyo Digital Absolute Calipers 150mm or 200mm (6" or 8")

  • It may work with others, I have only tested the Mitutoyo ones

Shout-out to TJDesign for the Skadis hook interface, I reused his hook as found on his Wera screwdriver model in the link below. Please use his hook and try his model if you have any Wera screwdrivers, I think they function and look great! 

https://www.printables.com/model/704004-skadis-wera-screwriver-mounts

Print Model in vertical orientation (see prusaslicer picture)

I used the following settings

  • 0.4 nozzle
  • 0.2 layer height
  • 20% infill
  • No supports

Can be printed in PLA or PETG (I printed mine is wood PLA)

Note: You will need to download the STD_BASE_HOOK from TJDesign to mount this. 

 

 

Tagi