1 / 3
V6 Mounts for Ender 3 V2 CoreXY (2nd Gen)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V6 Mounts for Ender 3 V2 CoreXY (2nd Gen)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An integrated SRA toolhead mount for V6 and V6 Volcano hotends.
- Use
bowden_v6_mountfor a regular e3D V6 hotend. To attach the hotend use the mount cover: https://www.printables.com/model/214737-cr-10-heavy-duty-customisable-modular-e3d-v6-mount/files#preview.file.RVQdB. I had to shrink it ~0.5mm so it squeezes the hotend firmly. - Use
dde_volcano_mountfor e3D V6 volcano hotend with BondTech BMG extruder or a Triangle-Lab clone (I've only tested with the clone but I assume its identical with the original).
Both mounts need M3 heated inserts for the 4 screws that attach it to the SRA toolhead backplate, fan mounts and regular V6 hotend mount cover.
Modified 5015 blower wings
There are two variants, one for regular BL/3D Touch sensor and one for BIQU MicroProbe V2.0.
Note: you will need to find maximums on X and Y axes because the blower wings are rather bulky. In my case I had to cut off around 5mm from the max. printable area.
Print settings
Print orientation and supports as in the picture.
Printed with PTFE, 3-5 walls, ≥40% infill.