1 / 5
Revolver II, DeSteiner: double-action-path, a way to print it more sturdier, for a long life!
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added some supports that you are able to print it sturdier.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 307
- Wydruki
- 0
- Wyświetlenia
- 1571
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (30)Powiązane
The small nipple on the “double-action-path” was broken three times. I tried to print it 45 degrees for a better layer adhesion , I've added supports, which you have to remove after printing.
It works great, even with PLA!
Print it with 0,1mm layer-high and use brim.
Again, Thank You DeSteiner for this wonderful revolver!