Jewelers Hammer Casting Bucks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of bucks for casting a variety of jewelers hammers.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I am sand casting a set of jewelers hammer heads. These are the models (bucks) that will be used to make the sand molds for casting. There are six hammers in the set. I have also included a mold for a buck to be inserted where the handle will go. Typically the handle bucks are molded from sand and water glass (liquid sodium silicate).
The .3mf files have been split for sand casting. They include dowels and holes for alignment. The holes do not currently show up in the preview here on Printables but they are there in the file when you load it. The split was done in PrusaSlicer.
If the pre-split files don't work for you the .stl files are whole shapes you can split yourself.