1 / 3
Smuggler Box Drain Plug for Chevrolet El Camino (1968-1977) — zdjęcie 1
1 / 3

Smuggler Box Drain Plug for Chevrolet El Camino (1968-1977)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A TPU plug to cover the drain holes in the El Camino Smuggler Box while preserving the drain functionality.

Ocena
0 / 5
Polubienia
2
Wydruki
0
Wyświetlenia
132
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Standard Digital File License

🔧 Tired of water or critters getting into your smuggler’s box?
The factory drain holes in El Caminos let water splash in from below while driving over water, leading to rust and water damage—even if you seal the trap door. 

🐁Mice and other small critters 🐍 can also sneak in through the openings causing interior damage and potential electrical issues. 

🌀Maintains Drain Functionality: Drained plugs allow for water 💦 to drain out in the event of water getting in, preserving the utility of the drain holes and allowing for air circulation. In the case of accidental water filtration, your car will still properly drain while protecting the inside. 

I designed this 3D-printed plug to: 
✔ Block splashes & keep critters out while still allowing drainage. 
✔ Prevent rust and water damage. 
✔ Fit snugly into the stock 1-inch drain holes in the smuggler’s box. 
✔ Be easily press-fit—no tools required! 

TO BE PRINTED ON TPU 

📦 Print Settings & Materials 
✅ Material: TPU (recommended for flexibility) or PETG for a firm fit 
✅ Layer Height: 0.2mm
✅ Infill: 15-20% (Not very relevant as it's all walls) 
✅ You can scale the model to more accurately fit your holes in case they are worn or drilled.
✅ Print Time: Around 20 min on a Ender v2
✅ Print Orientation: Flat side down 
✅ Supports: None needed 

💡 Best results: TPU 95A (flexible enough to press-fit but firm enough to hold). 

⚠ Licensing & Usage 
📌 This model is free for PERSONAL USE ONLY. 
❌ Not for resale. You may not sell the printed version or distribute the file commercially. 
❌ You are not allowed to modify or make derivatives of this model. 

💡 Don’t have a 3D printer? Get a professionally printed TPU set! 
🔗 DM me for a link to my listing!

Tagi