Utensil Holder [Updated]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a utensil holder to accommodate medium to small kitchen utensils
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 70
- Wydruki
- 2
- Wyświetlenia
- 265
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
UPDATED Feb 2026 - Some dimensional changes
My round utensil holder was very crowded which made it difficult to find medium to smaller items. This holder divides utensil compartments by depth. 160mm, 142mm, 124mm, 106mm, 88mm. When I need counter space, it nests nicely with the round holder. The tallest compartment I on the left side. If you need it on the right, Prusa slicr allows you to mirror the model so it will be on the right.
FYI. I've had issues with warping of large prints like this due to the cool environment the printer is in. I recently built an enclosure to contain the heat and this printed without warping or lifting from the bed.
Please checkout my other models on Printables