Rocketry 3.0in Electronics Bay for 2S Battery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This sled is used to hold a 2S 300mAh battery for use in a 3.0in high powered rocket electronics bay.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
Model is a high powered rocket electronics bay sled to hold a 2S 300mAh battery for powering electronics in a 3.0in rocket.
Image shows model built using PETG with no supports and 0.2mm layer height.
Slots are used to mount battery to sled using zip ties. Make sure to secure both the battery and the wiring harness to ensure the collector doesn't come undone under acceleration.
2S 300mAh battery sled can be paired with GPS tracker sled or altimeter sled in a setup that nest into each other and mount in the same electronics bay.
The sled can be paired with 2x 3.0in eBay End Caps to assemble an entire electronics bay. For the noted assembly, a piece of 6in 3.0in rocket coupler material is required as well as #10-24 all thread and 8x #10-24 nuts to mount the sled within the electronics bay.