Foosball in 2 plus pieces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two halves of a foosball and 4 pegs. Glue all parts together and have fun!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
After attempting to print all-in-one-piece foosballs and seeing it fail for different reasons every time I decided to make a ball that would be able to print without deformities! The ball will print perfectly with no supports and 100% infill (lines) and then you just add some glue to the halves and pegs and stick it together. The first ball I printed has yet to be destroyed! It is quite dense so that adds to the fun. You might want to sand it with some 220 grit sand paper for extra effect! I have experimented with creating a slightly egg shaped foosball just for extra fun and challenge but it was maybe too oblong and didn't work so well. This round ball is great and tons of fun though! Enjoy!
I used Loctite Extreme Gel glue!
https://www.lowes.com/pd/LOCTITE-Extreme-20-Gram-Gel-All-Purpose-Waterproof-Flexible-Multipurpose-Adhesive/1003213844