1 / 4
The Beast — zdjęcie 1
1 / 4

The Beast

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Beast

Ocena
5 / 5
Polubienia
484
Pobrania
2053
Wydruki
5
Wyświetlenia
5274
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The Beast Figurine
 
Printed with Fuzzy Skin effect.
Fuzzy Skin: Contour
Fuzzy Skin Point Distance: 0.25
Fuzzy Skin thickness: 0.17

If you're interested in the commercial use of my models, check the link to my Patreon https://patreon.com/29flo


As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.

All my photos are real and show an actual 3D-printed figure photographed by me.

Tagi