1 / 1
Dragon Ball Z - Majin Vegeta Graffiti - Hueforge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dragon Ball Z - Majin Vegeta Graffiti - Hueforge
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
Here is the PrusaSlicer version I used on my Prusa MK4S with MMU3. You can use the recommended 3MF or STL with the manual print instructions below.
Manual print instructions
Print at:
- 100% infill
- Layer height: 0.08mm
- First layer height: 0.16mm
- Ironing: 15%
Filaments Used:
- Polymaker PolyTerra PLA Black
- OVERTURE PLA Plus Blue
- OVERTURE Silk Gold PLA Filament
- Polymaker PolyTerra PLA Cotton White
Swap Instructions:
- Start with Black
- At layer #8 (0.72mm) swap to Blue
- At layer #12 (1.04mm) swap to Gold
- At layer #21 (1.76mm) swap to White for the rest.
