OrangeStorm Giga Enclosure Front + Doors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Files to create a front with doors for OrangeStorm Giga for an enclosure setup. Works with my enclosure top files.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 189
- Wydruki
- 0
- Wyświetlenia
- 1026
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For building an enclosure for the Elegoo OrangeStorm Giga, this is to have a front with doors that can magnetically shut.
Front panel is made from laser-cut 3mm clear acrylic, used m4 screws and nylock nuts to secure to the printer frame.
The magnet bars fit within the build volume of the Orange Storm Giga. The bottom bar adheres with double sided tape whereas the top bar presses into the groove of the printer frame. M4 threaded insert are used so you can screw the front acrylic to the magnet bars for extra security.
Hinges and handles were printed on the OrangeStorm Giga, feel free to download mine or modify to use your own designs.
Magnets used are basic door gadgets: 40.5x25.4x13.4mm
All is designed to not require permanent modification to the printer.
Also included is the back panel. Left/right side panels were not created by me and found in the OrangeStorm Giga users Facebook group.
I recommend checking dimensions against your printer and adjusting for tolerance if needed.