Modular Table Lamp Base - Lamp Socket a26/a27
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ribbed lamp base for modular snap on fit. Tops made separately.
- Ocena
- 0 / 5
- Polubienia
- 5
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Standard Digital File License
Top covers are sold separately, or you can design your own as long as the lip on the design is 140mm in diameter and at least 3mm in length.
Assembly instructions:
- Push cord from the outside hole to the bottom hole.
- Wire in light socket.
- Push the light socket from the bottom hole.
- Screw the nut included with socket to keep it together.
Base printing instructions that worked best for me:
- 0.4mm nozzle
- Layer Height - 0.3mm
- Infill - Adaptive Cubic @10%
- Top and bottom layers count - 5
- Top Fill Pattern - Concentric
- Support - only for the bottom hole.
Tops (140mm diameter snap on lip):
- Vase mode
- 0.4mm nozzle @100% scale
- 0.8mm nozzle @103-104% scale (depending on a model)
Light sockets this base was designed for - https://www.amazon.ca/dp/B083K71F95?ref=ppx_yo2ov_dt_b_fed_asin_title
Cord - https://www.amazon.ca/dp/B0D2XM761Y?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
For any questions feel free to DM us!
Lamp base - https://www.printables.com/model/1220341-modular-lamp-tops