Anchor 1.7qt / 1.65 L bowl lid replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement lid for the Anchor 1.75 quart bowl lid. It was simply re-scaled from letscho2k's smaller version…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement lid for the Anchor 1.75 quart bowl lid. It was simply re-scaled from letscho2k's smaller version for pyrex bowls. It seems to go on easily and fit well.
If I were making another one, to make it fit a little tighter, I might print it 0.5 mm smaller in diameter.
Print Settings
Printer Brand:
Creality
Printer:
K1
No
Supports:
No
Notes:
Random seams and "avoid crossing walls" make for a better print with less stringing.
This was just scaled (in x,y) in OrcaSlicer to 190.5 mm widest dimension. The z-dimension was left alone.
Category: Kitchen & Dining