Trash / Garbage Can Hinge Pin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A Hinge Pin for a trash can lid. This one was made to replicate a broken one found on a Rehrig Pacific Company trash can, but looks just like others for other brands of trash can. I have no reason to believe this one is any better or worse than others available here or on Printables.com, but I've included a cadquery file if you want to modify it.
8/2/2024 update: I made this for a family member and it inserted perfectly and has worked with no problems.
10/30/2024 update: The original one disappeared from the trash can that it was used in. The lid on that can is deformed a little, so I think there are some forces that push out the pin. It could also have broken, but I don't know. In an attempt to fix these possibilities, I made one that is a little thicker (stronger) and the 'wing' / retaining wedge a little wider to make it less likely to slide out. This new one is still working well so far. The new version of the .stl file is trash_can_hinge_2.stl. If you want to replicate the new design in the python file, the changed variables are tube_t = 4.0 (was 2.4) and wedge_d = 25 (was 24).
Print Settings
Printer Brand:
Creality
Printer:
K1
No
Supports:
No
0.2
Infill:
100%
Notes:
I printed this out on its 'head' with no supports, but with a brim. It could be stronger if printed out lying down, but then you'd likely need supports.
This was designed simply by taking measurements from the broken OEM one. It was fairly easy to design it in cadquery as a couple of cylinders and a cone followed by removing the inside of the main cylinder and the slot. Does anyone know if the slot has any purpose other than a little compressibility to ease insertion?
Category: Replacement Parts