Adjustable Paperwhite Kindle Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable stand that fits the most recent Kindle Paperwhite, including a cutout to accommodate the on/off button.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 262
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adjustable stand for the most recent iteration of the Kindle Paperwhite. The print consists of three pieces--a base, a back support, and the reader holder. The reader holder cradles the Kindle and has a cutout to accommodate the bottom location of the on/off button. On my MK4S, the back and reader holder can print together and the bottom prints separately.
The stand prints up nicely with either PLA+ or PETG. I use 20% infill and 4 vertical perimeters. All other settings are Prusa Slicer defaults for the materials. Do not slice the reader holder with supports everywhere, only on the build plate. There are dead-end holes in reader holder, and it is difficult to remove support material from the holes. Adjust the orientation of the pieces on the build plate to minimize the need for supports.
Assembly requires 4 8mm long 3 mm diameter machine screws. Holes in the reader holder are sized so that the screws are self-tapping. Do not over-tighten.
All attributed non-commercial uses and attributed non-commercial modifications are welcomed.