Dragon Burner WWG2 Filament Cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I edited the file for the case bottom to act as a mount and improved the lever for holding a blade.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 1375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I changed the lever to hold the blade and mate together better with larger pins. The case bottom now matches the WWG2 mount as well. After my first print, I realized how far the lever has to travel, so I did a further reworking of it to make it stick out to the left less far and require shorter travel for cutting. The old lever required around 30mm. The new one requires about 17mm. The lines from the sketch in the photo show a comparison of the old vs new travel distances.
Update 3/31/25: I modified the case top and bottom to have more clearance for the M3 screws that pass through for mounting and the pin on the thicker part of the lever is now a little bigger too. I also added a pushbar for filament cutting, which is remixed from the sherpa file.