1 / 2
6" sleeve or gasket for dragline irrigation line — zdjęcie 1
1 / 2

6" sleeve or gasket for dragline irrigation line

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

works for Cadman and Farmstar couplers at least

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

measure the thickness of groove to put gasket  in and adjust scale to fit I've had two different sizes on my couplers.

Tpu for gasket use whatever settings you want really but sticking to 100% infill will be best bet to keep from falling out while decoupling

use whatever plastic for sleeve pla pro would be best bet ive had decent use of asa 100% the infill. worse case it will be just a one time use piece ( ive only had 1 fail as a one time use but i was being lazy on infill on that one and it was cheap pla.)