1 / 2
Runcam Thumb 2 mount for GepRC Tern LR40 and others
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount for Runcam Thumb 2 works for any drones that have 25 mm screws and it can be attached to them.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This will fit Runcam Thumb 2 camera for any drone that has screws offset from each other at 25mm. Currently the ones I have are GepRC Tern LR40 and Diatone Roma L5.
Print with TPU on the side as shown in one of the images, with supports. 100% infill.
The angle of the camera is 15 deg. I had to limit it because I have GPS in front and had no space.