Barista Stencils
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My entry for the coffee competition, even if my chances of winning are rather slim
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 404
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My entry for the coffee competition, even if my chances of winning are rather slim. But who knows ^^
I have created three barista stencils here.
Admittedly, they are not the stencils you usually see.
With 90mm diameter of the plate and 50mm of the stencil, it should fit on almost any standard cup.
I strongly recommend using PETG here. PLA or PLA+ can also be used, but is not recommended because of the temperatures of coffee or warm milk foam.
Before first use, all edges should be reworked so that threads or small unclean areas are removed.
To clean, rinse with clear water and dry immediately.
If discolorations or deformations appear that can no longer be removed, the stencil should be replaced, but at the latest after a maximum of 3 months for hygiene reasons if it is used frequently.