6.5 inch rack External 2.5 Hard Disk Cage

• Click to Read About 6.5 inch and Rack Frame
• 6.5 inch Rack Mount Collection

this shelf cannot put into RackMate TT

i want to put external hard disk in rack but i have some limitation

• 2U
• must fit Seagate One Touch (115.3 x 80 x 20.9) so it can make adapter to fit smaller drive later like WD, Toshiba, 2.5 Hard Disk or SATA SSD
• rack depth 125mm max so it can remix to 6 inch rack later (150mm depth) and can mount some 80mm fan if need (fan depth 25mm)
• flexible as possible on mount 2.5 or SSD, can pass cable both side
• no screws
• picture is older version of model

due to limitation, time , filament to test fit, space left to do thing in 2U and ran out of idea then here

Model

• Cage - have 5 slot for Cage Tray
• Cage Tray
  • fit Seagate Portable Hard Drive (117 x 80 x 20)
  • fit Seagate One Touch (115.3 x 80 x 20.9)
  • other need adapter
    •  if not tight fit require M3*(10mm max) screws (spare HDD SSD mounting screws mostly come with motherboard) to screw in cage for each tray
• Adapter - insert into Cage Tray
  • SSD - support 2.5 inch hard disk, SATA SSD 7mm height, print 2 for each Cage Tray
  • WD My Passport - support max to 6TB (107.19 x 74.93 x 20.57)
  • Toshiba Canvio Basics  - support max to 4TB (109 x 78 x 19.5)

My print settings

• layer height: 0.2 
• wall: 3 (Cage and Cage Tray), 2 (Adapter)
• infill: 15%

If you enjoy my work, please consider support at link in profile.