1 / 6
Id Card DARTH VADER
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No supports needed Print test done with: -nozzle 0.4 mm -layer height 0.25 mm -infill 100% PLA or ABS
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
No supports needed
Print test done with:
-nozzle 0.4 mm
-layer height 0.25 mm
-infill 100%
-open holes with a simple cutter, walls of 1 perimeter