MMU 5x Filament Filter V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A new version of my first MMU Filament Filter Design. Also with Magnetic closure and new support for PC4-M6 Fittings.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 1143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
To avoid a clogged nozzle I designed a filter for MMU2S with 5 filaments.
The design consists of following parts:
1x Body
1x Cover
10x Fitting PC4-M6
4x Magnet diameter 5mm, 5mm Height
All is printed in PETG. The fittings can be screwed directly into the body. Place 2 magnets in the body and 2 in the cover. At least place two sponges (one under the filament and one above) in the body and close it.
For the right sponge height I created a cutting jig, see pictures.
Place the filter as close as possible to the MMU unit.