1 / 4
Prusa XL Camera Mount for Tapo C100 110 and EnXLosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
C100 Tapo camera mount for EnXLosure
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
I have made a camera mount for the EnXLosure. You can attach it between 2 screw points on the plexiglass.
It is printed in PETG and I have not tested other materials. The original ball of the Tapo C100 camera is used and clipped into my holder.
Supports are needed for the model when printing.
0,4mm Nozzle, 0,2mm Layer height, 3 Perimeter, infill 30%