Under-bottle mount for Daysaver Essential8 multi-tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An under-bottle mount for an allen-key shaped multi-tool such as the Daysaver Essential8
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An under-bottle mount for daysaver essential8.
Unlike the branded version, this one does not require spacers to fit under a bottle cage.
Print with supports at high infill. I used PETG; for all the weight weenies my print (60% infill, gyroid) was 17g compared to the official mount's 13g (with their spacers included).
The tool in the picture is: https://daysaver.fun/products/bike-multitool-essential8
Photos also show a printed Fidlock mount from: https://www.printables.com/model/475038-fidlock-compatible-bike-base
Edit 3/25/25: I've now taken the tool out and put it back about 25 times while performing routine maintenance, and have ridden roughly 200 miles and the tool still snaps in tightly and has not lost any bits.