Gridfinity Kuhn Rikon Vegetable Peeler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I am getting into Gridfinity and custom bins, and made this for my kitchen drawer. It easily holds 3 peelers, maybe 4.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I am getting into Gridfinity and custom bins, and made this for my kitchen drawer. It easily holds 3 peelers, maybe 4.
Also added is the silhouette if you need that to do your own thing. I scanned the peeler on a flatbed scanner, moved the scan/image into Fusion360 as a Canvas, then created a new sketch, traced the outline of the peeler, saved the sketch, and extruded to 2mm. I figure this can be imported into a CAD software to perform a cutout in your model. Please double-check the measurements in the slicer software and let me know of any issues.
Full disclosure, the finger holes are useless and too small. Remove using the finger hole and the opening at the top of the handle. Be careful, I am not responsible if you cut yourself.
This is my first model post, so not sure what else to write. Thank you.