Toshiba Libretto 50CT Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Toshiba Libretto sub-notebooks are notorious for disintegrating, so I created a reproduction model for 3D printers
- Ocena
- 5 / 5
- Polubienia
- 111
- Pobrania
- 681
- Wydruki
- 1
- Wyświetlenia
- 4299
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This model was originally created for FDM printers, but it should easily be able to be printed on resin printers as well. As printing in different orientations will give good structural integrity, i'd suggest making sure the layer lines are not running parallel to the main strain points, like the display. I would print the display pieces either flat or vertical set on one side.
NOTE: There are small anchor points added to both display models (front and back) that are designed to be anchor points for tree supports and should be removed.