8x8 Arrow Stand 220x220x82mm | Pfeilständer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple arrow stand without having to push anything through a plate and hitting a hole at the bottom.... For 64 Arrows.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
(Google translated)
The arrow stand is 220x200x82mm, for 8x8 arrows (64).
The holes get larger and larger, from 6.7mm, 7.7mm and 8.6mm.
Fits my ID 4.2, 5.2, 6.2 carbon arrows from min.1000 to 500 spine.
The distance between the holes is 28.2mm in all directions.
There are 5 holes cut out at the bottom that are 13x2.7mm in size, I used (household) self-adhesive silicone feet there.
Printed in PLA+ with 2 perimeters and "Support Cubic Infill" in the OrcaSlicer.
It took me 14 hours to print and used ~600g of filament.
Created with Fusion360.
Greetings from Germany
>>---->
-----------------------------------
Der Pfeilständer ist 220x200x82mm, kann 8x8 Pfeile (64) beherbergen.
Die Löcher werden Ansteigend größer, von 6,7mm, 7,7mm und 8,6mm.
Passt bei meinen ID 4.2, 5.2, 6.2 Carbonpfeilen von min.1000 bis 500 Spine.
Abstand der Löcher beträgt 28,2mm zueinander in alle Richtungen.
Unten sind 5 Löcher ausgespart die 13x2,7mm groß sind, ich habe dort (Haushalts-) selbstklebende Silikonfüße eingesetzt.
Gedruckt in PLA+ mit 2 Perimetern und "Support Cubic Infill" im OrcaSlicer.
Waren bei mir 14Std. Druckzeit und ~600g Filament.
Mit Fusion360 erstellt.
Grüße aus Deutschland
>>---->