Slim Can 355mL Koozie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a koozie/adapter for the slim 355ml cans. Slim cans fit in it, and it will then fit into thicker koozies.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 242
- Wydruki
- 1
- Wyświetlenia
- 935
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I wanted a koozie that could fit the slim 355ml cans, but that would then allow them to fit into coolers for thicker cans. I couldn't find anything that quite worked when searching, so I created a new one that fit in testing perfectly after a few iterations.
I was able to print this multiple times with no trouble when using .10mm(DETAIL) settings with 12% infill and generic PLA settings in PrusaSlicer. I set it to .3mm layer height with a .2mm first layer. No brim, skirt, or supports were necessary. I did play with the top fill pattern, as the chamfered edge can come out a little strange. Of the patterns I tried, Archimedean Chords worked best.