1 / 3
Minimal 3in1 portafilter / tamper / Umikot ring stand — zdjęcie 1
1 / 3

Minimal 3in1 portafilter / tamper / Umikot ring stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Minimum ring to support a naked portafilter while doubling as a tamper base or Umikot stand

Ocena
0 / 5
Polubienia
8
Pobrania
21
Wydruki
0
Wyświetlenia
279
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

Minimum ring base required to support a naked portafilter with handle perfectly touching on the table. Inner hole doubles as a tamper holder.

Every portafilter is slightly diffferent in bottom diameter and handle angle, so its impossible to create a base that can serve multiple designs. Here are some variations that I endded up doing. 

  • One for a chinese naked PF (YUAN-ECT with colorfull handle) 
  • A slightly taller one for another chinese PF (bingo)
  • A 3in1 Umikot variation, which acts as base for
    • Umikot WDT 58mm ShortTab
    • any 58mm tamper
    • Lelit original naked portafilter