Aqara S1+ Magicpad Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This converts the EU mounting to a 2 Gang UK back box.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I was replacing my lightwaverf 2-gang automated light switch with the Aqara S1+ Magicpad. I already a neutral in the box but the wall box is a UK 2 Gang Box and not quite as deep as required in the Aqara S1+.
This mounting frame screws into the back box and the Aqara mounting plate screws on top allowing the Aqara S1+ to fit neatly. I used a threaded brass heat inserts for the middle screw for reliability; the other screws thread into the back box.
In the picture I printed the mounting frame in Prusament ASA Signal White.
I have provided two versions, one with ears to reduce warping when printing with ASA. The ears snap off easily.