Veteran Honor Box Challenge Coin, Pin, Military Bars, Dog Tags and Bullet Casing Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Models to hold the memorabilia from a proper military funeral.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 712
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The honor box was purchased at Michaels Arts & Crafts store. These models are used to hold the bullet casings, U. S. Pin, challenge coins, and military bars.
Casings are held in place using a small wire or thread and sit on a “shelf” on the model. The parametric model can be adjusted to have holes to mount the casings on the left or right by changing the Left_Center_Right variable to (-1, 0, or 1) in FreeCAD. This was printed with PETG.
The FreecCAD models are parametric so they can easily be modified if your shadowbox. coins, or dog tags are a different size.