Valve Index headstrap coin counterweights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Counterweight system for the Valve Index VR headset, using 5 eurocent coins as weight
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
I was not satisfied with any of the existing options for counterweights (too obtrusive, inconvenient or unreliable to install), so I made a new system for my VR set. This one sits closer to the headstrap, making it less obtrusive. It uses 5 eurocent coins so you can customize the weight; the entire assembly can hold 52 coins, which together with the print weighs about 230 grams.
I used a sandwich design for the mounting clips, assembled with screws. This provides a very secure mount on the headband. Additionally it provides a useful attachment point for cable guides, like the one included in the files. The cable guide needs to be printed in a flexible filament (there is no way to insert the cable if you can't flex it).
I included the Fusion 360 file in case you would like to customize anything.
Printing instructions:
No specific instructions, it is not a difficult print. Default 2 perimeters and 20% infill will work fine. You will likely have to print the cups with supports, as a sagging top layer means you can't fit as many coins in it.
Hardware required:
- 4 x M3 screws >12mm long
- 4 x M3 nuts.
- You will need one M3 screw at least 18mm long if you want to install the cable guide