Fractal Design Meshify 2 XL (Define 7 XL) fan Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With the HDD installed in the Fractal Design Meshify 2 XL (Define 7 XL), it is possible to install a fan on the top.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 618
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's still being edited.
This modeling allows for the fan to be forced to be installed on top while the hard drive is on the bottom.
Basically, even if you add 140mm, 120mm like in my picture when there is already a hard drive at the bottom, it does not help cooling. I just wanted to add an additional fan because I have a lot of Arctic p12, p14.
And if you choose the model file "no add fan" which does not install an additional fan by slightly increasing the length of the hard disk cover, it can help cool the hard disk at the bottom.
However, if you have an AIO radiator in the front, it may conflict. Based on the Arctic P14 with a 27T front fan, it may conflict with a thicker fan than this.
